[1] 魏纲, 王新, 崔允亮, 等.超长大直径变截面钢管复合桩竖向承载力算法[J].地下空间与工程学报, 2022, 18(3):810-817. (Wei Gang, Wang Xin, Cui Yunliang, et al. Calculation Method of Vertical Bearing Capacity of Super-Long,Large-Diameter and Step Tapered Composite Steel Pile[J]. Chinese Journal of Underground Space and Engineering, 2022, 18(3):810-817. (in Chinese))
[2] 陈亚东, 于艳, 董云, 等.竖向受荷螺杆桩工作性状试验研究[J].地下空间与工程学报, 2022, 18(3):860-867. (Chen Yadong, Yu Yan, Dong Yun, et al. Experimental Study on Working Behavior of Vertically Loaded Screw-shaft Pile[J]. Chinese Journal of Underground Space and Engineering, 2022, 18(3):860-867. (in Chinese))
[3] 郭雪丰. 砂衬齿形桩竖向承载力分析[D].昆明:昆明理工大学, 2013. (Guo Xuefeng. Analysis of vertical stress mechanism in Toothed Pile with Sand Liner[D]. Kunming: Kunming University of Science & Techmology, 2013. (in Chinese))
[4] 周佳锦, 龚晓南, 王奎华,等.静钻根植竹节桩抗压承载性能[J].浙江大学学报(工学版), 2014, 48(5):835-842.(Zhou Jiajin, Gong Xiaonan, Wang Kuihua, et al. Performance of static drill rooted nodular piles under compression[J].Journal of Zhejiang University (Engineering Science), 2014, 48(5): 835-842. (in Chinese))
[5] 周佳锦, 王奎华, 龚晓南,等.静钻根植竹节桩桩端承载性能试验研究[J]. 岩土力学,2016,37(9):2603-2609.(Zhou Jiajin, Wang Kuihua, Gong Xiaonan, et al. A test on base bearing capacity of static drill rooted nodular pile[J]. Rock and Soil Mechanics, 2016, 37(9):2603-2609. (in Chinese))
[6] 周佳锦. 静钻根植竹节桩承载及沉降性能试验研究与有限元模拟[D].杭州: 浙江大学,2016. (Zhou Jiajin. Test and modeling on behavior of the pre-bored grouting planted nodular pile[D]. Hangzhou: Zhejiang University,2016. (in Chinese))
[7] 孟振, 陈锦剑, 王建华, 等.砂土中螺纹桩承载特性的模型试验研究[J]. 岩土力学, 2012, 33(增1):141-145. (Meng Zhen, Chen Jinjian, Wang Jianhua, et al. Study of model test on bearing capacity of screw piles in sand[J]. Rock and Soil Mechanics, 2012, 33(Supp.1):141-145. (in Chinese))
[8] 马宏伟, 刘力, 汪鹏, 等.螺距对螺纹桩竖向承载力影响的模型试验研究[J]. 安徽理工大学学报(自然科学版), 2021, 41(3): 22-27. (Ma Hongwei, Liu Li, Wang Peng, Yang Xiaoli, et al. A Model Test Study on the Influence of Screw Pitch on the Vertical Bearing Capacity of Screw Piles[J]. Journal of Anhui University of Science and Technology (Natural Science), 2021, 41(3):22-27. (in Chinese))
[9] 王国才, 赵志明, 奚灵智, 等.螺纹桩竖向承载特性研究[J].浙江工业大学学报, 2020, 48(1):90-96. (Wang Guocai, Zhao Zhiming, Xi Lingzhi, et al. Research on vertical load bearing characteristics of thread piles[J]. Journal of Zhejiang University of Technology, 2020, 48(1):90-96. (in Chinese))
[10] 黄群标, 崔立川, 李勇, 等.挤扩支盘桩结构设计对桩基竖向承载性能影响的试验研究[J]. 公路, 2021, 66(12): 134-143. (Huang Qunbiao, Cui Lichuan, Li Yong, et al. Experimental research on the effect of structural design of pile with expanded branches and bearing plates on the vertical bearing performance[J]. Highway, 2021, 66(12):134-143. (in Chinese))
[11] 王伊丽, 徐良英, 李碧青, 等.挤扩支盘桩竖向承载力特性和影响因素的数值研究[J]. 土木工程学报, 2015, 48(增2):158-162. (Wang Yili, Xu Liangying, Li Biqing, et al. Finite element numerical study on the axial bearing behaviors and factors of squeezed branch pile[J]. China Civil Engineering Journal, 2015, 48(Supp.2):158-162. (in Chinese))
[12] 符羽佳, 李光范, 丁庆磊,等.一种伸臂式桩侧成齿装置[P].中国专利: CN201720829332.X, 2018-01-16. (Fu Yujia, Li Guangfan, Ding Qinglei et al. A device for forming teeth on the side of a pile with a telescopic arm[P].China Patent:CN201720829332.X, 2018-01-16. (in Chinese))
[13] 云南省住房和城乡建设厅.砂衬齿形桩应用技术规程(DBJ 53/T-43-2011)[S].昆明:云南科技出版社,2012.(Yunnan Provincial Department of Housing and Urban-Rural Development. Technical Specification for Toothed Pile with Sand Liner (DBJ 53/T-43-2011) [S]. Kunming: Yunnan Science and Technology Press, 2012. (in Chinese))
[14] 中华人民共和国住房和城乡建设部.螺纹桩技术规程(JGJ/T 379-2016)[S].北京:中国建筑工业出版社, 2016. (Ministry of Housing and Urban-Rural Development of the People's Republic of China. Technical specification for screw concrete pile (JGJ/T 379-2016)[S]. Beijing:China Architecture & Building Press, 2016. (in Chinese))
[15] 中国工程建设标准化协会.挤扩支盘灌注桩技术规程(CECS 192: 2005)[S].北京:中国建筑工业出版社,2005.(China Association for Engineering Construction Standardization. Technical specification for cast-in-situ pile with expanded branches and plates (CECS 192:2005)[S]. Beijing:China Architecture & Building Press, 2005. (in Chinese))
[16] 符羽佳, 张仰福, 李光范, 等.砂土中齿桩竖向承载性状试验研究[J]. 人民长江, 2020, 51(5):184-190. (Fu Yujia, Zhang Yangfu, Li Guangfan, et al. Experimental study on characteristics of tooth pile under vertical load[J]. Yangtze River, 2020, 51(5):184-190. (in Chinese))
[17] 符羽佳, 杜鹏, 张仰福, 等.砂土中齿桩抗拔特性模型试验研究[J]. 长江科学院院报, 2021, 38(11):121-126.(Fu Yujia, Du Peng, Zhang Yangfu, et al. Model Test on Pullout Resistance Characteristics of Multi-tooth Pile in Sand[J]. Journal of Yangtze River Scientific Research Institute, 2021, 38(11): 121-126. (in Chinese))
[18] Du P, Fu Y J, Liu X L, et al. Model Test Study on the Load-bearing Behaviour of Multi-tooth Piles under Different Bearing Layers[J]. KSCE Journal of Civil Engineering, 2023, 27(3):955-965.
[19] 张婧. 存在软弱下卧层的大直径扩底桩竖向承载性状的数值模拟[D].上海: 同济大学, 2008.(Zhang Jing. Numerical Simulation for Vertical Bearing Behavior of Large Diameter Belled Pile in Soft Substratum[D]. Shanghai: Tongji University, 2008. (in Chinese))
[20] 费康, 张建伟. ABAQUS在岩土工程中的应用[M].北京:中国水利水电出版社, 2010. (Fei Kang, Zhang Jianwei. Application of ABAQUS in Geotechnical Engineering[M]. Beijing: China Water & Power Press, 2010. (in Chinese))
[21] 李金良, 邢宇铖, 崔伟, 等.竖向荷载作用下岩溶区单桩承载特性研究[J]. 济南大学学报(自然科学版), 2020, 34(4):417-422. (Li Jinliang, Xing Yucheng, Cui Wei, et al. Bearing Characteristics of Single Pile Under Vertical Load in Karst Area[J]. Journal of University of Jinan (Science and Technology), 2020, 34(4): 417-422. (in Chinese))
[22] 中华人民共和国住房和城乡建设部. 建筑基桩检测技术规范(JGJ 106-2014)[S]. 北京:中国建筑工业出版社, 2014. (Ministry of Housing and Urban-Rural Development of the People's Republic of China. Technical code for testing of building foundation piles(JGJ 106-2014)[S]. Beijing: China Architecture & Building Press, 2014. (in Chinese))
[23] 杜鹏, 刘晓玲, 周德泉,等.预制齿桩[P]. 中国专利:CN202221247183.3, 2022-09-20. (Du Peng, Liu Xiaoling, Zhou Dequan, et al. Prefabricated tooth pile[P]. China Patent: CN202221247183.3, 2022-09-20. (in Chinese))
