Study on Floating of Shield Tail Segment Controlled by Synchronous Two-Component Grout in Weathered Rock Strata

  • Hu Rucheng ,
  • Zhong Xiaochun ,
  • Yi Binbin ,
  • Liu Zhe ,
  • Liu Cheng
Expand
  • 1. China Railway No. 5 Engineering Bureau Group Co., Ltd., Changsha 410117, P. R. China;
    2. College of Civil and Transportation Engineering, Hohai University, Nanjing 210098, P. R. China;
    3. Construction Business Headquarters, Guangzhou Metro Group Co., Ltd., Guangzhou 510330, P. R. China

Received date: 2024-02-16

  Online published: 2025-01-03

Abstract

Aiming at the problem of excessive floating of segments when shield tunneling in full section weathered surrounding rock strata firstly, the initial setting time of the slurry was tested by the inverted cup method under different additive dosage (strengthening dry powder (Material A), liquid activator (Material B)), and the synchronous two-component grout with controllable initial setting time and satisfactory pumping performance was prepared. Secondly, the finite element model of segment floating was established, considering the nonlinearity of axial tension and circumferential shear stiffness of the ring joints. The model can be used to consider the gradual accumulation effect of floating displacement during shield tunneling, and the influence of synchronous two-component grout on the floating of shield tail segment in stable surrounding rock stratum was obtained. Finally, the developed synchronous two-component grout was applied to a shield tunnel project in Guangzhou, and the effect of controlling segment floating is verified, which greatly reduces the leakage of segment joint with excellent segment assembly quality. The results show that: (1) 1% Material A and 1.5% Material B are mixed evenly with the single grout mortar in the shield tail grouting pipe and injected into the shield tail gap, which can effectively reduce the floating displacement of the segment up to 79%. (2) The floating displacement gradually increases with the increase of the distance from the shield tail and tends to be stable. The stable position is about 10.5 m (7 rings) from the shield tail. The maximum floating displacement is about 23 mm. (3) The use of the new synchronous two-component grout also effectively reduces the number of leakage points of the segments. The reduction is up to 59%, which greatly reduces the construction cost of plugging grouting due to leakage and has good economic benefits.

Cite this article

Hu Rucheng , Zhong Xiaochun , Yi Binbin , Liu Zhe , Liu Cheng . Study on Floating of Shield Tail Segment Controlled by Synchronous Two-Component Grout in Weathered Rock Strata[J]. Chinese Journal of Underground Space and Engineering, 2024 , 20(6) : 2010 -2019 . DOI: 10.20174/j.JUSE.2024.06.27

References

[1] 《中国公路学报》编辑部. 中国隧道工程学术研究综述·2015[J]. 中国公路学报, 2015, 28(5): 1-65. (Editorial department of China journal of highway and transport. Review on China's tunnel engineering research[J]. China Journal of Highway and Transport, 2015, 28(5): 1-65. (in Chinese))
[2] 施有志, 阮建凑, 林树枝. 海底盾构隧道管片上浮分析及控制研究[J]. 地下空间与工程学报, 2022, 18(5): 1665-1677. (Shi Youzhi, Ruan Jiancou, Lin Shuzhi. Floating analysis and control of subsea shield tunnel segment[J]. Chinese Journal of Underground Space and Engineering, 2022, 18(5): 1665-1677. (in Chinese))
[3] 张碧文, 钱王苹, 漆泰岳,等. 城市地铁下穿高铁路基沉降预测及安全控制[J]. 地下空间与工程学报, 2021, 17(1): 282-289. (Zhang Biwen, Qian Wangping, Qi Taiyue, et al. Prediction of the high-speed railway subgrade settlement induced by the tunnel construction and its safety control[J]. Chinese Journal of Underground Space and Engineering, 2021, 17(1):282-289. (in Chinese))
[4] 高守栋, 刘超, 张子新,等. 地面出入式盾构隧道施工对周边地层扰动研究[J]. 地下空间与工程学报, 2020, 16(3): 903-914. (Gao Shoudong, Liu Chao, Zhang Zixin, et al. Study on the influence of surrounding strata during GPST tunnelling process[J]. Chinese Journal of Underground Space and Engineering, 2020, 16(3): 903-914. (in Chinese))
[5] 史华. 盾构机硬岩掘进管片上浮问题分析及改进措施[J]. 施工技术, 2018, 47(19): 38-41, 45. (Shi Hua. Analysis and improvement measures of shield machine hard rock segment floating problem[J]. Construction Technology, 2018, 47(19): 38-41, 45. (in Chinese))
[6] 杨延栋, 陈馈, 李凤远, 等. 全断面硬岩地层盾构隧道管片上浮控制技术研究[J]. 隧道建设, 2015, 35(2): 180-184. (Yang Yandong, Chen Kui, Li Fengyuan, et al. Control technologies for up-floating of segment rings of shield-bored tunnel in full-face hard-rock ground[J]. Tunnel Construction, 2015, 35(2): 180-184. (in Chinese))
[7] 周少东, 林文书, 王红喜, 等. 高性能同步注浆材料专用外加剂的研制[J]. 隧道建设, 2014, 34(3): 205-211. (Zhou Shaodong, Lin Wenshu, Wang Hongxi, et al. Development of additives dedicated for preparing high-performance simultaneous grouting material[J]. Tunnel Construction, 2014, 34(3): 205-211. (in Chinese))
[8] 游永锋, 梁奎生, 谭华灵. 盾构快速掘进下同步注浆材料优化配合比设计[J]. 隧道建设,2012,32(6): 816-820. (You Yongfeng, Liang Kuisheng, Tan Hualing. Optimization of mixing proportion of grout for simultaneous grouting in shield tunneling[J]. Tunnel Construction, 2012, 32(6): 816-820. (in Chinese))
[9] 张细宝, 杨新安, 郭乐. 控制管片上浮的同步注浆浆液配合比优化[J]. 建筑机械化, 2014, 35(5): 85-87. (Zhang Xibao, Yang Xin'an, Guo Le. Optimization of mix proportion of synchronous grouting based on controlling segments floating[J]. Construction Mechanization, 2014, 35(5): 85-87. (in Chinese))
[10] 董赛帅, 杨平, 姜春阳, 等.盾构隧道管片上浮机理与控制分析[J]. 地下空间与工程学报, 2016, 12(1): 49-54. (Dong Saishuai, Yang Ping, Jiang Chunyang, et al. Analysis of mechanism and controls of segment floating of shield tunnels[J]. Chinese Journal of Underground Space and Engineering, 2016, 12(1): 49-54. (in Chinese))
[11] 叶飞, 朱合华, 丁文其. 基于弹性地基梁的盾构隧道纵向上浮分析[J]. 中国铁道科学, 2008(4): 65-69. (Ye Fei, Zhu Hehua, Ding Wenqi. Longitudinal upward movement analysis of shield tunnel based on elastic foundation beam[J]. China Railway Science, 2008(4): 65-69. (in Chinese))
[12] 王道远, 袁金秀, 朱永全, 等. 软土盾构隧道施工阶段上浮计算模型探讨[J]. 现代隧道技术, 2018, 55(1): 148-155. (Wang Daoyuan, Yuan Jinxiu, Zhu Yongquan, et al. Calculation model of the uplift movement of a shield tunnel during construction in soft soil[J]. Modern Tunnelling Technology, 2018, 55(1): 148-155. (in Chinese))
[13] 叶俊能, 刘源, 陈仁朋, 等. 盾构隧道管片施工期容许上浮量研究[J]. 岩石力学与工程学报, 2014, 33(增2): 4067-4074. (Ye Junneng, Liu Yuan, Chen Renpeng, at al. Study of the permissible value of upward floating for segment in shield tunnel construction[J]. Chinese Journal of Rock Mechanics and Engineering, 2014, 33(Supp.2): 4067-4074. (in Chinese))
[14] 黄旭民, 黄林冲, 梁禹. 施工期同步注浆影响下盾构隧道管片纵向上浮特征分析与应用[J]. 岩土工程学报, 2021, 43(9): 1700-1707. (Huang Xumin, Huang Linchong, Liang Yu. Analysis and application of longitudinal uplift characteristics of segments of shield tunnels affected by synchronous grouting during construction period[J]. Chinese Journal of Geotechnical Engineering, 2021, 43(9): 1700-1707. (in Chinese))
[15] 陈艺元. 盾构同步注浆复合水泥基—水玻璃双液浆材料特性研究及强度模拟试验[D]. 北京:北京交通大学, 2017. (Chen Yiyuan. Investigation into the characteristics and strength simulation test of the complex two-component in synchronous grouting of shield tunneling[D]. Beijing: Beijing Jiaotong University, 2017. (in Chinese))
[16] 朱伟, 陆凯君, 邢慧堂, 等. 盾构隧道壁后注浆中“定时浆”试验研究[J]. 隧道建设(中英文), 2022, 42(5): 784-790. (Zhu Wei, Lu Kaijun, Xing Huitang, et al. Experimental study of “time-controlling cement mortar” in backfill grouting of shield tunnel[J]. Tunnel Construction, 2022, 42(5): 784-790. (in Chinese))
[17] 钟小春, 张金荣, 秦建设, 等. 盾构隧道纵向等效弯曲刚度的简化计算模型及影响因素分析[J]. 岩土力学, 2011, 32(1): 132-136. (Zhong Xiaochun, Zhang Jinrong, Qin Jianshe, et al. Simplified calculation model for longitudinal equivalent bending stiffness of shield tunnel and its influence factors' analysis[J]. Rock and Soil Mechanics, 2011, 32(1): 132-136. (in Chinese))
[18] 朱令, 丁文其, 杨波. 壁后注浆引起盾构隧道上浮对结构的影响[J]. 岩石力学与工程学报, 2012, 31(增1): 3377-3382. (Zhu Ling, Ding Wenqi, Yang Bo. Effect of shield tunnel uplift caused by back-filled grouting on structure[J]. Chinese Journal of Rock Mechanics and Engineering, 2012, 31(Supp.1): 3377-3382. (in Chinese))
[19] 小泉淳. 盾构隧道管片设计-从容许应力设计法到极限状态设计法[M]. 北京:中国建筑工业出版社, 2012. (Koizumi Atsushi. The segment design of shield tunneling[M]. Beijing: China Architecture and Building Press, 2012. (in Chinese))
[20] 陈仁朋, 刘源, 刘声向, 等. 盾构隧道管片施工期上浮特性[J]. 浙江大学学报(工学版), 2014, 48(6): 1068-1074. (Chen Renpeng, Liu Yuan, Liu Shengxiang, et al. Characteristics of upward moving for lining during shield tunneling construction[J]. Journal of Zhejiang University (Engineering Science), 2014, 48(6): 1068-1074. (in Chinese))
Outlines

/