In order to verify the suitability and correctness of plane test and curved surface test in studying the frictional mechanical characteristics of pipe jacking in rock stratum under complex contact conditions, large-scale rock direct shear test was used to study the shear frictional characteristics between plane sandstone and new curved sandstone and concrete pipe under seven kinds of complex contact conditions. On this basis, the mechanical effects of pipe jacking under low contact height and variable contact conditions were numerically analyzed. The results show that the difference of the shape of the specimen results in the great difference of the effective friction angle between the plane test and the curved test. In numerical analysis, it is more reasonable to uniformly set the contact range of pipe jacking to 1/2 contact than 1/3 contact. By comparing the jacking force error of 1/2 contact condition in two types of tests, it can be saw that the average jacking force error based on the result of curved surface friction test is smaller than that of plane test. Finally, it is concluded that the curved surface test has better adaptability in the relationship between test conditions and the quantitative accuracy of test results.
Li Chao
,
Zhong Zuliang
,
Zhou Xiaohan
,
Chen Xiu
. Study on the Frictional Mechanical Properties of Curved Filling Interface of Rock Pipe Jacking[J]. Chinese Journal of Underground Space and Engineering, 2024
, 20(6)
: 1913
-1927
.
DOI: 10.20174/j.JUSE.2024.06.17
[1] Shimada H, Sasaoka T, Khazaei S, et al. Performance of mortar and chemical grout injection into surrounding soil when slurry pipe-jacking method is used[J]. Geotechnical and Geological Engineering, 2006, 24(1): 57-77.
[2] 刘猛,杨春利,亓路宽.非开挖施工钢制管直顶顶力数值分析[J].地下空间与工程学报, 2019, 15(增1): 211-218.(Liu Meng, Yang Chunli, Qi Lukuan. Numerical analysis of jacking force of steel pipe in trenchless construction[J]. Chinese Journal of Underground Space and Engineering, 2019, 15(Supp.1): 211-218.(in Chinese))
[3] Namli M, Guler E. Effect of bentonite slurry pressure on interface friction of pipe jacking[J]. Journal of Pipeline Systems Engineering and Practice, 2017, 8:040160162.
[4] Shou K, Yen J, Liu M. On the frictional property of lubricants and its impact on jacking force and soil-pipe interaction of pipe-jacking[J]. Tunnelling and Underground Space Technology, 2010, 25(4): 469-477.
[5] 王剑锋.临海复合盐碱地层顶管润滑泥浆性能试验研究[J]. 地下空间与工程学报, 2021, 17(增1): 55-62.(Wang Jianfeng. Experimental study on properties of lubricating mud for pipe jacking in coastal composite saline-alkali soil[J]. Chinese Journal of Underground Space and Engineering, 2021, 17(Supp.1): 55-62.(in Chinese))
[6] 李超,钟祖良,刘新荣,等.复杂接触条件下超长距离混凝土顶管—围岩摩擦特性及现场卡管处置验证研究[J].岩石力学与工程学报, 2019, 38(6):1197-1208.(Li Chao, Zhong Zuliang, Liu Xinrong, et al. Study on friction characteristics of super-long distance concrete pipe jacking and surrounding rock under complex contact conditions and verification of on-site pipe sticking disposal[J]. Journal of Rock Mechanics and Engineering, 2019,38 (6): 1197-1208.(in Chinese))
[7] 王明胜,刘大刚. 顶管隧道工程触变泥浆性能试验及减阻技术研究[J]. 现代隧道技术, 2016, 53(6): 182-189.(Wang Mingsheng, Liu Dagang. Research on thixotropic mud performance test and drag reduction technology of pipe jacking tunnel engineering[J]. Modern Tunnel Technology, 2016, 53(6): 182-189.(in Chinese))
[8] 李思慧,刘海卿. 基于均匀设计的泥浆最优配合比试验研究[J]. 硅酸盐通报,2018,37(7):2280-2284.(Li Sihui, Liu Haiqing. Experimental study on optimal mix ratio of slurry based on uniform design[J].Bulletin of Silicate, 2018, 37(7): 2280-2284.(in Chinese))
[9] 郭伟,谢昊,武仁杰,等. 顶管施工过程中膨润土润滑作用试验研究[J]. 河南科技, 2015(1): 115-118.(Guo Wei, Xie Hao, Wu Renjie, et al. Experimental study on bentonite lubrication in pipe jacking construction[J]. Henan Science and Technology, 2015(1): 115-118.(in Chinese))
[10] 刘波,章定文,刘松玉,等. 大断面顶管通道近接穿越下覆既有地铁隧道数值模拟与现场试验[J]. 岩石力学与工程学报, 2017(11): 2850-2860.(Liu Bo, Zhang Dingwen, Liu Songyu, et al. Numerical simulation and field test of large cross-section pipe jacking passage passing through the existing subway tunnel[J]. Journal of Rock Mechanics and Engineering, 2017(11): 2850-2860.(in Chinese))
[11] 张豪. 顶管工作井开挖支护及顶进过程的数值模拟分析[D]. 石家庄:石家庄经济学院, 2015.(Zhang Hao. Numerical simulation analysis of excavation support and jacking process of pipe jacking working well[D]. Shijiazhuang: Shijiazhuang Institute of Economics, 2015.(in Chinese))
[12] 赵志峰,邵光辉. 顶管施工的三维数值模拟及钢管壁厚的优化[J]. 地下空间与工程学报, 2013, 9(1): 161-165.(Zhao Zhifeng, Shao Guanghui. 3D numerical simulation of pipe jacking construction and optimization of steel pipe wall thickness[J]. Chinese Journal of Underground Space and Engineering, 2013, 9(1): 161-165.(in Chinese))
[13] 黄宏伟,胡昕. 顶管施工力学效应的数值模拟分析[J]. 岩石力学与工程学报, 2003(3): 400-406.(Huang Hongwei, Hu Xin. Numerical simulation analysis of mechanical effect of pipe jacking construction[J]. Journal of Rock Mechanics and Engineering, 2003(3): 400-406.(in Chinese))
[14] Yen J, Shou K. Numerical simulation for the estimation the jacking force of pipe jacking[J].Tunnelling and Underground Space Technology, 2015, 49: 218-229.
[15] Ong D E L, Choo C S. Back-analysis and finite element modeling of jacking forces in weathered rocks[J]. Tunnelling and Underground Space Technology, 2016, 51: 1-10.
[16] Li C, Zhong Z L, Liu X R, et al. Numerical simulation for an estimation of the jacking force of ultra-long-distance pipe jacking with frictional property testing at the rock mass-pipe interface[J]. Tunnelling and Underground Space Technology, 2019, 89: 205-221.
