Mechanical Performance Analysis of Prestressed Corrugated Steel-Concrete Composite Plates

  • Zhao Guoqing ,
  • Cao Beilei ,
  • Sun Zhe
Expand
  • 1. School of Civil Engineering, Shenyang Jianzhu University, Shenyang 110168, P.R. China;
    2. Liaoning Provincial Transportation Planning and Design Institute Co.,Ltd.,Shenyang 110166, P.R. China;
    3. School of Civil Engineering, Shenyang Urban Construction University, Shenyang 110167, P.R. China

Received date: 2024-02-11

  Online published: 2024-10-31

Abstract

To fully exploit the mechanical performance of corrugated steel-concrete composite plate, this paper proposes a prestressed corrugated steel-concrete composite plate structure. Based on the validation of the accuracy of numerical models using experimental results, different types of composite plate were analyzed and compared for their mechanical performance. The loading process and failure mode of the structure were studied to clarify the mechanism of the upper corrugated steel plate and prestressing in the composite plate, in which the combination of the two significantly improved the elastic working range and failure resistance of the composite plates. Additionally, the mechanical properties of prestressed double-layer corrugated steel-concrete (PSCS) composite plates are studied. The results show that: the type of corrugated steel plate, the thickness of core concrete, the spacing of studs and the prestress level have a significant influence on the anti-sliding ability and anti-damage ability of PSCS composite plates, among which the thickness of core concrete and the waveform of corrugated steel plate have a more obvious influence. Appropriate prestress level can better exert the mechanical characteristics of PSCS composite plates. The results of this study provide useful reference and guidance for the design and optimization of prestressed corrugated steel-concrete composite structures.

Cite this article

Zhao Guoqing , Cao Beilei , Sun Zhe . Mechanical Performance Analysis of Prestressed Corrugated Steel-Concrete Composite Plates[J]. Chinese Journal of Underground Space and Engineering, 2024 , 20(5) : 1589 -1599 . DOI: 10.20174/j.JUSE.2024.05.16

References

[1] 孙润方, 许劲松. 埋置式波纹钢—混凝土结构中波纹钢的承载增强作用研究[J]. 现代隧道技术, 2018, 55(5): 254-262. (Sun Runfang, Xu Jinsong. Reinforcement effect of corrugated steel on the bearing capacity of embedded concrete-lined corrugated steel structure[J]. Modern Tunnelling Technology, 2018, 55(5): 254-262. (in Chinese))
[2] 王君顺. 波纹钢—混凝土组合明洞在双线铁路隧道洞口防护中的应用[J]. 铁道建筑, 2021, 61(9): 6. (Wang Junshun. Application of corrugated steel-concrete composite open cut tunnel in portal protection engineering of double track railway tunnel[J]. Railway Engineering, 2021, 61(9): 6. (in Chinese))
[3] 李国锋, 丁文其, 业海, 等. 隧道波纹钢装配式初期支护结构施工技术研究[J]. 地下空间与工程学报, 2020, 16(增1): 178-184. (Li Guofeng, Ding Wenqi, Ye Hai, et al. Study on the construction technology of corrugated steel prefabricated support structure in tunnel[J]. Chinese Journal of Underground Space and Engineering, 2020, 16(Supp.1): 178-184. (in Chinese))
[4] 王哲, 张清照, 潘青, 等. 装配式波纹钢棚洞的施工方法及受力特性研究[J]. 地下空间与工程学报, 2020, 16(增1): 185-193. (Wang Zhe, Zhang Qingzhao, Pan Qing, et al. Construction method mechanical characteristics of prefabricated corrugated steel shed tunnel[J]. Chinese Journal of Underground Space and Engineering, 2020, 16(Supp.1): 185-193. (in Chinese))
[5] Sangwoo J. Design and numerical assessment of a rapid-construction corrugated steel-concrete-steel protective structure[J]. International Journal of Protective Structures, 2019, 10(4): 470-485.
[6] Lu J Y, Wang Y H, Zhai X M. Response of flat steel-concrete-corrugated steel sandwich panel under drop-weight impact load by a hemi-spherical head[J]. Journal of Building Engineering, 2021, 44: 102890.
[7] Kang J S, Davidson J S. Structural effect of concrete lining for concrete-lined corrugated steel pipes[J]. Structure and Infrastructure Engineering, 2013, 9(2): 130-140.
[8] 李百建, 李勇, 朱良生, 等. 波纹钢管加固不同破损程度混凝土管涵实验[J]. 中国公路学报, 2020, 33(1): 62-68. (Li Baijian, Li Yong, Zhu Liangsheng, et al. Experiment on reinforced concrete pipes with different deteriorated levels rehabilitated with corrugated steel pipes[J]. China Journal of Highway and Transport, 2020, 33(1): 62-68. (in Chinese))
[9] Xia Q L, Wang Y Y, Jelovica J, et al. Experimental study on corrugated steel-concrete composite semicircular arches under midspan loading[J]. Structures, 2022, 38: 1137-1150.
[10] Zhang J L, Liu B D, Liu R. Behavior of sinusoidal-corrugated-steel-plate-concrete composite slabs: experimental investigation and theoretical model development[J]. Journal of Constructional Steel Research, 2021, 187: 106958.
[11] 周小淇, 黄俊, 李海光. 波纹钢板—混凝土组合梁的力学性能研究[J]. 地下空间与工程学报, 2020, 16(增2): 656-663. (Zhou Xiaoqi, Huang Jun, Li Haiguang. Analysis on the mechanical property of the corrugated steel-concrete composite beam[J]. Chinese Journal of Underground Space and Engineering, 2020, 16(Supp.2): 656-663. (in Chinese))
[12] 王罡, 夏启龙, 王玉银, 等. 双层波纹钢混凝土组合拱静力性能研究[J]. 建筑结构学报, 2021, 42, (增2): 358-364. (Wang Gang, Xia Qilong, Wang Yuyin, et al. Study on static behavior of corrugated steel-concrete-corrugated steel arch[J]. Journal of Building Structure, 2021, 42(Supp.2): 358-364. (in Chinese))
[13] 中华人民共和国国家质量监督检验检疫总局.冷弯波纹钢管(GB/T 3456-2017)[S]. 北京: 中国标准出版社, 2017. (General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China.Cold-formed corrugated steel pipe (GB/T 3456-2017)[S]. Beijing: Standards Press of China, 2017. (in Chinese))
[14] 中华人民共和国住房和城乡建设部.核电站钢板混凝土结构技术标准(GB/T51340-2018)[S]. 北京: 中国计划出版社,2018. (Ministry of Housing and Urban-Rural Development of the People's Republic of China. Technical standard for steel plate concrete structures of nuclear power plants (GB/T51340-2018)[S]. Beijing: China Planning Press, 2018. (in Chinese))
[15] 中华人民共和国住房和城乡建设部. 预应力混凝土结构设计规范(JGJ 369-2016)[S]. 北京: 中国建筑工业出版社, 2016. (Ministry of Housing and Urban-Rural Development of the People's Republic of China. Code foe design of prestressed concrete structures (JGJ 369-2016)[S]. Beijing: China Architecture & Building Press, 2016. (in Chinese))
[16] Nguyen Hang T N, Tan K H, Kanda T. Investigations on web-shear behavior of deep precast, prestressed concrete hollow core slabs[J]. Engineering Structures, 2019, 183: 579-593.
[17] 中华人民共和国住房和城乡建设部. 混凝土结构设计规范 (GB50010-2010)[S]. 北京: 中国建筑工业出版社, 2010. (Ministry of Housing and Urban-Rural Development of the People's Republic of China. Code of design of concrete structures (GB50010-2010)[S]. Beijing: China Architecture & Building Press, 2010. (in Chinese))
[18] Shanmugam N E, Kumar G, Thevendran V. Finite element modelling of double skin composite slabs[J]. Finite Elements in Analysis and Design, 2002, 38(7): 579-579.
[19] Rana M M, Uy B, Mirza O. Experimental and numerical study of the bond-slip relationship for post-tensioned composite slabs[J]. Journal of Constructional Steel Research, 2015, 114: 362-379.
[20] Liu J P, Hu H F, Li J,et al. Flexural behavior of prestressed concrete composite slab with precast inverted T-shaped ribbed panels[J]. Engineering Structures, 2020, 215: 110687.
[21] Yan J B, Qian X D, Liew J Y R, et al. Damage plasticity based numerical analysis on steel-concrete-steel sandwich shells used in the Arctic offshore structure[J]. Engineering Structures, 2016, 117: 542-559.
[22] Ghaemdoust M R, Yang J, Wang F L, et al. Flexural behavior of prestressed concrete-filled steel tubular flange beams[J]. Structures, 2022, 43: 1643-1667.
[23] American Institute of Steel Construction. Specification for structural steel buildings (ANSI/AISC 360-16)[S]. Washington: American National Standard, 2016.
[24] 蒋庆, 叶献国, 章益民, 等. 高强钢筋高强混凝土预应力梁抗裂性能试验研究[J]. 建筑结构学报, 2014, 35(12): 51-57. (Jiang Qing, Ye Xianguo, Zhang Yimin, et al. Experimental research on cracking resistance of prestressed high-strength reinforced concrete beams[J]. Journal of Building Structures, 2014, 35(12): 51-57. (in Chinese))
[25] Sohel K M A, Richard Liew J Y. Steel-Concrete-Steel sandwich slabs with lightweight core — Static performance[J]. Engineering Structures, 2011, 33(3): 981-992.
[26] 郭宇韬. 双钢板组合沉管隧道结构受力机理及设计方法研究[D]. 北京: 清华大学, 2020. (Guo Yutao. Research on mechanical behaviors and design methods of steel-concrete-steel immersed tunnel composite structures[D]. Beijing: Tsinghua University, 2020. (in Chinese))
[27] 钟祖良,熊一丹,张绍炜,等.新型预应力钢筒混凝土顶管受力特征试验研究[J].地下空间与工程学报,2022,18(5):1623-1629.(Zhong Zuliang,Xiong Yidan,Zhang Shaowei,et al.Prototype test research on axial load-bearing characteristics of new jacking prestressed concrete cylinder pipe[J].Chinese Journal of Underground Space and Engineering,2022,18(5):1623-1629.(in Chinese))
[28] Marimuthu V, Seetharaman S, Arul J S, et al. Experimental studies on composite deck slabs to determine the shear-bond characteristic (m-k) values of the embossed profiled sheet[J]. Journal of Constructional Steel Research, 2007, 63(6): 791-803.
[29] 王宁, 闫敬良, 刘晓刚, 等. 装配式钢—混组合梁的抗剪连接性能研究[J]. 工业建筑, 2022, 52(9): 121-128. (Wang Ning, Yan Jingliang, Liu Xiaogang, et al. Research on shear connection performance of prefabricated steel-concrete composite beams[J]. Industrial Construction, 2022, 52(9): 121-128. (in Chinese))
[30] 聂建国. 钢—混凝土组合结构桥梁[M]. 北京: 人民交通出版社,2011. (Nie Jianguo. Steel-Concrete Composite Bridges[M]. Beijing: China Communication Press, 2011. (in Chinese))
[31] European Committee for Standardization. Eurocode 4: Design of Composite Steel and Concrete Structures-Part1-1 (EN 1994-1-1:2004 (E))[S]. Brussels: European Standard, 2004.
Outlines

/