In order to improve the drilling efficiency of bit drilling in poor-drillability formation, the authors of this article put forward, a cutting-percussion hybrid bit, the fixed-cutting units and impact-crushing units of which are mutually independent and are able to work in parallel. Through finite element analysis, it is concluded that the impact teeth will degenerate the material and mechanical properties of the rock, and that the polycrystalline diamond compact cutters will remove the pre-damaged rock with relatively low energy consumption, The simulation results show that the maximum axial force and maximum cutting force of rock breaking by punching are reduced, the average axial force is reduced by 34.93 N, 12.1%, and the average tangential force is reduced by 26.09 N, 9.1%, thus improving the rock-breaking efficiency of the bit.Moreover, on the basis of the geometrical and kinematical characteristics of the hybrid bit, geometrical relationships between the teeth and the bit body, as well as the kinematics and kinetics of the teeth, are studied in compound coordinate systems. Furthermore, by programming in MATLAB, the rock-breaking process of the hybrid bit is simulated and the simulation results consist of the bottom-hole profile, cutting area, cutting volume, and cutting force of the cutters, providing the theoretical basis for the research and development of the hybrid bit.
Xie Rongbin
,
Cui Guojie
,
Liu Wei
,
Yang Yingxin
,
Xu Guangda
. Working Dynamics of Impact Scraping Hybrid Drill Bits Analysis and Research on Rock Breaking Efficiency[J]. Chinese Journal of Underground Space and Engineering, 2024
, 20(4)
: 1309
-1316
.
DOI: 10.20174/j.JUSE.2024.04.24
[1]Gerbaud L, Menand S. PDC bits: all comes from the cutter/rock interaction[A]//IADC/SPE Drilling Conference[C]. Miami, Florida, 2006: 98998.
[2]Perneder L, Detournay E, Downton G. Bit/rock interface laws in directional drilling[J]. International Journal of Rock Mechanics and Mining Sciences, 2012, 51,81-90.
[3]Patrick S, Dougherty, Pudioprawoto R, et al. Bit cutter-on-rock tribometry:analyzing friction and rate-of-penetration for deep well drilling substrates[J]. Tribology International, 2014,178-185.
[4]Ismail A, Hussein S, Eckstrom D, et al. Hybrid drill bit combining fixed-cutter and roller-cone elements improves drillingperformance in challenging application in the western desert [A]//SPE Middle East Oil and Gas Show and Conference[C]. 2013.
[5]Xu Z X, Jia Y L, Zhou J, et al. Hybrid drill bit combining fixed-cutter and roller-cone elements exceeds expectations in challenging application in tarim basin[A]//IADC/SPE Asia Pacific Drilling Technology Conference 2014: Driving Sustainable Growth Through Technology and Innovation[C]. Bangkok, Thailand, 2014: 170499.
[6]Plemons B, Douglas C, Shen Y, et al. New cutter technology for faster drilling in hard/abrasive formations[A]//International Oil and Gas Conference and Exhibition in China[C]. Beijing, 2010: 132143.
[7]Antonio Maria Guimaraes Leite Cruz, Rijswijk (NL)[P]. Percussive Drill Bit. United States Patent:7546888B2, 2009-06-16.
[8]Eddison A M, Stonehaven. Drilling Apparatus with Percussive Action Cutter[P]. United States: 7461706B, 2008-12-9.
[9]Powell S, Herrington D, Botton B, et al. Fluid Hammer Increases PDC Performance through Axial and Torsional Energy at the Bi[A]// SPE Annual Technical Conference and Exhibition[C]. New Orleans Louisiana, 2013: 166433.
[10]杨迎新.PDC钻头切削力学研究[D].成都: 西南石油学院, 2003.(Yang Yingxin. Study on cutting mechanics of PDC bit [D]. Chengdu: Southwest Petroleum Institute, 2003.(in Chinese))
[11]石志明. PDC齿切削载荷的测试与分析[D].成都: 西南石油大学,2006. (Shi Zhiming. Testing and analysis of PDC tooth cutting load [D]. Chengdu: Southwest Petroleum University, 2006. (in Chinese))
[12]石永泉.潜孔锤钻进技术[M].成都:西南交通大学出版社, 2013.(Shi Yongquan. DTH hammer drilling technology[M]. Chengdu: Southwest Jiaotong University Press, 2013.(in Chinese))
[13]Brandon B D, et al. Development of a New IADC Fixed Cutter Drill Bit Classification System[A]// SPE/IADC Drilling Conference[C]. New Orleans, Louisiana, 1992: 23940.
[14]Zhang Y H, Burhan Y, Chen C, et al. Fully rotating PDC cutter gaining momentum: conquering frictional heat in hard/abrasive formations improves drilling efficiency[A]//SPE/IADC Middle East Drilling Technology Conference & Exhibition[C]. New Orleans, Louisiana, 2013: 166465.
[15]Rajabov V, Miska S, Mortimer L, et al. The effects of rake and side rake angles on mechanical specific energy of single PDC cutters with selected rocks at varying depth of cuts and confining pressures[A]//IADC/SPE Drilling Conference and Exhibition[C]. Sna Diego, California, 2012: 151406.
[16]Dolezal T, Felderhoff F, Holliday A, et al. Expansion of field testingn and application of new hybrid drill bit[A]//SPE Annual Technical Conference and Exhibition[C]. Denver, Colorado, 2011: 146737.
[17]Menand S, Sellami H, Simon C, et al. How bit profile and gauges affects well trajectory[J]. SPE Drilling &Completion, 2003,18(1) :22-32.
[18]Schaaf S, Mallary C R. Point-the-Bit Rotary Steerable System: Theory an Field Results[A]//2000 SPE Annual Techincal Conference and Exhibition delta:Drilling and Completion[C]. Dallas, Texas, 2001: 63247.
[19]钟云鹏,杨迎新,于洪波,等.旋转模块式PDC钻头破岩机理研究[J].地下空间与工程学报, 2019, 15(6):1742-1748.(Zhong Yunpeng, Yang Yingxin, Yu Hongbo, et al. Study on rock breaking mechanism of rotary modular PDC bit [J]. Journal of Underground Space and Engineering, 2019, 15(6):1742-1748. (in Chinese))
[20]林兆虎,杨迎新,于洪波,等.屋脊齿破岩效率研究[J]. 地下空间与工程学报, 2019, 15(增2):751-758.( Lin Zhaohu, Yang Yingxin, Yu Hongbo, et al. Study on rock breaking efficiency of ridge teeth [J]. Journal of Underground Space and Engineering, 2019,15(Supp.2):751-758. (in Chinese))
[21]杨迎新,王云田,周春晓,等.微心PDC钻头心部结构优化的实验研究[J]. 地下空间与工程学报, 2021, 17(4):1171-1180.( Yang Yingxin, Wang Yuntian, Zhou Chunxiao, et al. Experimental study on the optimization of the core structure of micro center PDC bits [J]. Journal of Underground Space and Engineering, 2021, 17(4):1171-1180. (in Chinese))
