In order to study the cracking scale and main fracture precursor characteristics of polypropylene fiber recycled concrete, 20 groups of specimens with coarse aggregate replacement rates of 25% and 50% were designed and manufactured. Through the uniaxial compression acoustic emission test, the acoustic emission energy and main frequency of polypropylene fiber recycled concrete fracture process were extracted. Using energy as a medium, the correspondence between cracking scale and acoustic emission characteristics is discussed. In this paper, K-means clustering method is used to perform a two-dimensional cluster analysis of large scale cracking and small scale cracking, and then a support vector machine is used to obtain the boundary between large scale cracking and small scale cracking. The evolution law of acoustic emission signal in the fracture process of polypropylene fiber recycled concrete was analyzed. It was found that the acoustic emission event rate decreased, the large scale cracking signal increased, and the low-energy small scale cracking signal disappeared. The concept of main fracture precursor response coefficient is introduced. The calculation results show that the precursor response coefficient of the disappearance characteristics of low energy small scale cracking signal is the largest, whose precursor response time is the earliest.
Yang Xin
,
Tang Yu
,
Liang Ninghui
. Study on Main Fracture Precursor Characteristics of Polypropylene Fiber Recycled Concrete[J]. Chinese Journal of Underground Space and Engineering, 2024
, 20(4)
: 1247
-1256
.
DOI: 10.20174/j.JUSE.2024.04.18
[1]梁宁慧. 多尺度聚丙烯纤维混凝土力学性能试验及拉压损伤本构模型研究[D]. 重庆:重庆大学, 2014. (Liang Ninghui. The mechanics performance test of multi-scale polypropylene fiber concrete and the study of tension and compression damage constitutive model[D]. Chongqing: Chongqing University, 2014. (in Chinese))
[2]Kravchuk R, Landis E N. Acoustic emission-based classification of energy dissipation mechanisms during fracture of fiber-reinforced ultra-high-performance concrete[J]. Construction and Building Materials, 2018, 176(21): 531-538.
[3]Banjara N K, Sasmal S, Srinivas V. Damage progression study in fibre reinforced concrete using acoustic emission technique[J]. Smart Structures and Systems, 2019, 23(2): 173-184.
[4]Sherif M M, Khakimova E M, Tanks J, et al. Cyclic flexural behavior of hybrid SMA/steel fiber reinforced concrete analyzed by optical and acoustic techniques[J]. Composite Structures, 2018, 201: 248-260.
[5]Xargay H, Ripani M, Folino P, et al. Acoustic emission and damage evolution in steel fiber-reinforced concrete beams under cyclic loading[J]. Construction and Building Materials, 2021, 274: 121831.
[6]Tayfur S, Alver N, Abdi S, et al. Characterization of concrete matrix/steel fiber de-bonding in an SFRC beam: principal component analysis and k-mean algorithm for clustering AE data[J]. Engineering Fracture Mechanics, 2018, 194: 73-85.
[7]Abouhussien A A, Hassan A A A. Crack growth monitoring in fiber-reinforced self-consolidating concrete via acoustic emission[J]. ACI Materials Journal, 2019, 116(5): 181-191.
[8]Bhosale A, Rasheed M A, Prakash S S, et al. A study on the efficiency of steel vs. synthetic vs. hybrid fibers on fracture behavior of concrete in flexure using acoustic emission[J]. Construction and Building Materials, 2019, 199: 256-268.
[9]Dev A, Chellapandian M, Prakash S S, et al. Failure-mode analysis of macro-synthetic and hybrid fibre-reinforced concrete beams with GFRP bars using acoustic emission technique[J]. Construction and Building Materials, 2020, 249: 118737.
[10]Friedrich L, Colpo A, Maggi A, et al. Damage process in glass fiber reinforced polymer specimens using acoustic emission technique with low frequency acquisition[J]. Composite Structures, 2021, 256: 113105.
[11]Sharma G, Sharma S, Sharma S K. Fracture monitoring of steel and GFRP reinforced concrete beams using acoustic emission and digital image correlation techniques[J]. Structural Concrete, 2021, 22(4): 1962-1976.
[12]Xu L H, Li B, Ding X X, et al. Experimental investigation on damage behavior of polypropylene fiber reinforced concrete under compression[J]. International Journal of Concrete Structures and Materials, 2018, 12(1): 68.1-68.20.
[13]De Smedt M, Vandecruys E, Vrijdaghs R, et al. Acoustic emission-based damage analysis of steel fibre reinforced concrete in uniaxial tension tests[J]. Construction and Building Materials, 2022, 321: 126254.
[14]Rasheed M A, Prakash S S, Gangadharan R. Acoustic emission characterization of hybrid fiber reinforced cellular concrete under direct shear loads[J]. Journal of Nondestructive Evaluation, 2019, 38(1): 17.1-17.14.
[15]Aggelis D G, De Sutter S, Verbruggen S, et al. Acoustic emission characterization of damage sources of lightweight hybrid concrete beams[J]. Engineering Fracture Mechanics, 2019, 210: 181-188.
[16]Ben Ameur M, El Mahi A, Rebiere J L, et al. Investigation and identification of damage mechanisms of unidirectional carbon/flax hybrid composites using acoustic emission[J]. Engineering Fracture Mechanics, 2019, 216: 106511.
[17]Yang L Y, Xie H Z, Fang S Z, et al. Experimental study on mechanical properties and damage mechanism of basalt fiber reinforced concrete under uniaxial compression[J]. Structures, 2021, 31(9): 330-340.
[18]Saha I, Sagar R V. Classification of the acoustic emissions generated during the tensile fracture process in steel fibre reinforced concrete using a waveform-based clustering method[J]. Construction and Building Materials, 2021, 294: 123541.
[19]Nair A, Cai C S, Kong X. Using acoustic emission to monitor failure modes in CFRP-strengthened concrete structures[J]. Journal of Aerospace Engineering, 2020, 33(1): 04019110.
[20]中国建筑科学研究院有限公司.混凝土物理力学性能试验方法规程(GB/T 50081—2019)[S]. 北京: 中国建筑出版社, 2019. (China Academy of Building Research. Code for test methods of physical and mechanical properties of concrete (GB/T 50081-2019)[S]. Beijing: China Architecture & Building Press, 2019. (in Chinese))
[21]Takai N, Mifune Y. Digital watermarking by a holographic technique[J]. Applied Optics, 2002, 41(5): 865-873.
[22]张艳博, 梁鹏, 田宝柱, 等. 花岗岩灾变声发射信号多参量耦合分析及主破裂前兆特征试验研究[J]. 岩石力学与工程学报, 2016, 35(11): 2248-2258. (Zhang Y B, Liang P, Tian B Z, et al. Multi parameter coupling analysis of acoustic emission signals of granite disaster and precursor characteristics of the main rupture[J]. Chinese Journal of Rock Mechanics and Engineering, 2016, 35(11): 2248-2258. (in Chinese))
[23]曾正文, 马瑾, 吴秀泉, 等. 单节理岩体变形与破坏过程中声发射能量的特征及意义[J]. 地震地质, 1994, 16(1): 71-77. (Zeng Z W, Ma J, Wu X Q, et al. Characteristics and implications of acoustic emission energy in the process of deformation and failure of single-joint rockmass[J]. Seismology and Geology, 1994, 16(1): 71-77. (in Chinese))
