基于重庆市科学大道九龙坡段综合管廊工程,从运营与安全需求出发,结合重庆山地城市复杂地质与多专业管线入廊条件开展定制化设计,确定给水(DN1200、DN300)、再生水(DN300)、10 kV电力、通信以及110/220 kV高压电缆等入廊方案,并在高压舱引入GIL(气体绝缘金属封闭输电线路)技术以提升输电可靠性。综合管廊沿科学大道九龙坡段道路西侧辅道下线性布置,总长7 003.556 m,采用综合舱+高压舱双舱矩形断面与分层支架体系,曲线段采用直折沟组织出线,关键节点设置T型与十字型支线交叉,实现管线分支、连通与断面转换的协同优化。岩土方面针对填挖交错、临建受限及高挖方岩石段等工况,分别采用分级放坡、钻孔灌注桩支护及肋柱式锚杆挡墙等差异化支护措施,并结合块片石换填与高压旋喷桩地基加固满足承载与变形控制。结构采用预制标准段与现浇节点段融合,主体为C40混凝土、抗渗等级P10并按100年耐久性配置防腐与双层双向配筋;同时配套防火分区、通风、排水及智能监控系统并预留智慧化设备条件。研究成果可为复杂环境综合管廊工程设计提供参考。
Based on the comprehensive utility tunnel project of Jiulongpo district of Chongqing Science Avenue, this paper carries out customized design from the perspective of operation and safety requirements, combined with the complex geology of Chongqing mountainous city and the conditions of multi-disciplinary pipeline access to the corridor, and determines the access schemes of water supply (DN1200, DN300), reclaimed water (DN300), 10kV power, communication and 110/220kV high-voltage cable, and introduces GIL technology in high-voltage cabin to improve transmission reliability. The utility tunnel is linearly arranged along the west side auxiliary road of Science Avenue, with a total length of 7003.556 m. The utility tunnel adopts the rectangular section and layered support system of comprehensive and high pressure cabin, and the curve section adopts straight ditch to organize the outlet line. The key nodes are set up with T-shaped and cross-shaped branch lines to realize the collaborative optimization of pipeline branch, connection and section transformation. In terms of rock and soil, differential support measures such as graded grading slope, bored pile support and rib-column anchor retaining wall are adopted respectively for the working conditions of filling-excavation interlaced, temporary construction limited and high-excavation rock section, and combined with block stone replacement and high-pressure jet grouting pile foundation reinforcement to meet the bearing and deformation control. The structure adopts the fusion of prefabricated standard section and cast-in-place joint section. The main body of the structure is C40 concrete, impermeability grade P10, and anti-corrosion and double-layer bidirectional reinforcement are configured according to 100-year durability. At the same time, the fire protection zoning, ventilation, drainage and intelligent monitoring system are matched, and the intelligent equipment conditions are reserved to provide reference for the design of similar complex environment utility tunnel projects.
[1] 梁宁慧,兰菲,庄炀,等. 城市地下综合管廊建设现状与存在问题[J]. 地下空间与工程学报, 2020, 16 (6):1622-1635.
[2] 许云骅,金善朝,徐浩煜. 综合管廊运维目标、原则及新技术应用[J]. 中国给水排水, 2021, 37 (8):53-58.
[3] 重庆市主城西部片区干线综合管廊修建性详细规划[E]. 重庆市住房和城乡建设委员会, 2022.
[4] 中国城市规划学会, 面向高质量发展的空间治理[R]. 2021.
[5] 席林,刘浩宇,杨曜宇,等. 香港科技大学(广州)综合管廊工程设计[J]. 地下空间与工程学报, 2022, 18 (增2):529-536.
[6] 张莹,李睿. 佛山新城裕和路综合管廊工程设计[J]. 中国给水排水, 2015, 31 (18):34-36,42.
[7] 张建兵,韩懿,窦荣舟,等. 长沙市湘府西路综合管廊工程设计[J]. 中国给水排水, 2017, 33 (18):73-77.
[8] 陈志龙,张智峰,王海丰. 我国城市地下综合管廊建设现状与发展趋势[J]. 隧道建设(中英文), 2025, 45(9):1615-1626.
[9] Zhang J B, Han Y, Dou R Z, et al. Design of xiangfuxi road urban utility tunnel in Changsha city[J]. China Water & Wastewater, 2017, 33 (18):73-77. (in Chinese)
[10] 一纵线白彭路至小湾立交段工程(科学大道九龙坡段)施工图[Z]. 重庆市设计院有限责任公司, 2025.
[11] 重庆市城市综合管廊建设“十四五”规划(2021-2025年)[E]. 重庆市住房和城乡建设委员会, 2022.
[12] 中华人民共和国住房和城乡建设部. 城市综合管廊工程技术规范(GB 50838-2015)[S]. 北京:中国计划出版社, 2015.
[13] 中华人民共和国住房和城乡建设部.建筑地基基础设计规范(GB 50007-2011)[S]. 北京:中国计划出版社, 2011.
[14] 中华人民共和国住房和城乡建设部.建筑给水排水设计标准(GB 50015-2019)[S]. 北京:中国计划出版社, 2019.
[15] 中华人民共和国市场监督管理总局.管廊工程用预制混凝土制品试验方法(GB/T 38112-2019)[S]. 北京:中国计划出版社, 2019.
[16] 中国工程建设标准化协会.给水排水工程埋地预应力混凝土管和预应力钢筒混凝土管管道结构设计规程(CECS 140-2011)[S]. 北京:中国计划出版社, 2011.
[17] 中华人民共和国住房和城乡建设部.建筑灭火器配置设计规范(GB 50140-2005)[S]. 北京:中国计划出版社, 2005.
[18] 中华人民共和国住房和城乡建设部.城市综合管廊运营服务规范(GB/T 38550-2020)[S]. 北京:中国计划出版社, 2020.