[1] 白海龙. 城市综合管廊发展趋势研究[J]. 中国市政工程, 2015(6): 78-81. (Bai Hailong. A Trend Study of Urban Common Tunnel Development[J]. China Municipal Engineering, 2015(6): 78-81. (in Chinese))
[2] 钱七虎. 建设城市地下综合管廊,转变城市发展方式[J]. 隧道建设, 2017, 37(6): 647-654. (Qian Qihu. To Transform Way of Urban Development by Constructing Underground Utility Tunnel[J]. Tunnel Construction, 2017, 37(6): 78-81. (in Chinese))
[3] 曾庆红. 圆形截面综合管廊及节点设计[J]. 建设科技, 2017(1): 64-66. (Zeng Qinghong. Design of Circular Cross Section Pipe Gallery and Joint[J]. Construction Science and Technology, 2017(1): 64-66. (in Chinese))
[4] 高树东,高文元,卢权威,等.软土地区盾构隧道弯曲刚度有效率取值研究[J].地下空间与工程学报,2021,17(1):248-254,262. (Gao Shudong, Gao Wenyuan, Lu Quanwei, et al. Study on the Value of Effective Bending Rigidity Ratio of Subway Shield Tunnel in Soft Soil Area[J]. Chinese Journal of Underground Space and Engineering, 2021.17(1): 248-254, 262 (in Chinese))
[5] 李雨强,王士民,梁敏飞,等.盾构隧道双层衬砌横向力学结构参数优化研究[J].地下空间与工程学报,2020,16(6):1711-1721. (Li Yuqiang, Wang Shimin, Liang Minfei, et al. Optimization Study on Transverse Mechanical Structural Parameters of Shield Tunnel with Double Linings[J]. Chinese Journal of Underground Space and Engineering, 2020,16(6):1711-1721. (in Chinese))
[6] 张旭,叶冠林,吴惠明,等.地面出入式盾构隧道受力变形特性数值分析[J].地下空间与工程学报,2016,12(2):436-441. (Zhang Xu, Ye Guanlin, Wu Huiming, et al. Numerical Study on Deformation Characteristics of Ground Penetrating Shield Tunnel [J]. Chinese Journal of Underground Space and Engineering, 2016,12(2):436-441. (in Chinese))
[7] 石立国, 张耀, 李海龙,等. 上下分体装配式预制管廊施工技术[J]. 施工技术, 2017,46(21):18-21,45. (Shi Liguo, Zhang Yao, Li Hailong, et al. Construction of Precast Utility Tunnel with Upper and Lower Assembly[J]. Construction Technology, 2017,46(21):18-21,45. (in Chinese))
[8] 段亚刚. 小直径盾构在综合管廊建设中的关键技术研究[J]. 铁道工程学报, 2017,34(4): 65-69. (Duan Yagang. Research on the Key Technology of Small Diameter Shield Machine in Municipal Comprehensive Pipe Gallery [J]. Journal of Railway Engineering Society, 2017,34(4): 65-69. (in Chinese))
[9] 叶飞,李思翰,刘畅,等.大直径盾构隧道纵向刚度增强措施研究[J].地下空间与工程学报,2024,20(3):959-968. (Ye Fei, Li Si-han, Liu Chang, et al. Study on Longitudinal Stiffness Enhancement Measures of Large Diameter Shield Tunnel[J]. Chinese Journal of Underground Space and Engineering, 2024,20(3):959-968. (in Chinese))
[10] 荣哲, 孙玉品. 城市综合管廊设计与计算[J]. 工业建筑, 2013,43(增1):230-232. (Rong Zhe, Sun Yuping. Structural Design and Calculation of Municipal Pipe Gallery[J]. Industrial Construction, 2013,43(Supp.1):230-232. (in Chinese))
[11] 孟伟. 六边形管廊及组合结构的受力变形特性研究[J]. 施工技术, 2019,48(18):120-124. (Meng Wei, Mechanical Deformation Characteristics of Hexagonal Tunnel and Composite Structure[J]. Construction Technology, 2019,48(18):120-124. (in Chinese))
[12] 郭琳. 单舱及多舱六边形管廊结构的受力性能研究[J]. 水利水电技术, 2019,50(5):234-244. (Guo Lin. Force Characteristics of the Hexagonal Tunnel and Composite Structure[J]. Water Resources and Hydropower Engineering, 2019,50(5):234-244. (in Chinese))
[13] 土木学会[日].隧道标准规范(盾构篇)及解说[M].北京: 中国建筑工业出版社,2001. (Japanese Civil Engineering Society. Code (for Shield Tunnel) and Explanation for Tunneling[M]. Beijing: China Architecture & Building Press, 2001. (in Chinese))
[14] Uchida K. Design andEngineering of Large Bore Slurry Shield Tunnel Lining System for Trans-Tokyo Bay Highway[J]. Civil Engineering in Japan, 1992, 30:54-67.
[15] 黄宏伟, 徐凌, 严佳梁,等. 盾构隧道横向刚度有效率研究[J]. 岩土工程学报, 2006,28(1):11-18. (Huang Hongwei, Xu Ling, Yan Jialiang, et al. Study on Transverse Effective Rigidity Ratio of Shield Tunnels[J]. Chinese Journal of Geotechnical Engineering, 2006,28(1):11-18. (in Chinese))
[16] 唐检军,周宇航,石钰锋,等.盾构隧道管片接头缩尺试验模拟方法[J].隧道建设(中英文), 2022, 42(7):1187-1195. (Tang Jianjun, Zhou Yuhang, Shi Yufeng, et al. Simulation Method of Scale Reduction Tests for Shield Tunnel Segment Joints[J]. Tunnel Construction, 2022,42(7):1187-1195. (in Chinese))
[17] 叶飞,杨鹏博,毛家骅,等.基于模型试验的盾构隧道纵向刚度分析[J].岩土工程学报, 2015,37(1):83-90. (Ye Fei, Yang Pengbo, Mao Jiahua, et al. Longitudinal Rigidity of Shield Tunnels Based on Model Tests[J]. Chinese Journal of Geotechnical Engineering, 2015,37(1):83-90. (in Chinese))
[18] 魏纲,张书鸣,余剑英,等.地面堆载对盾构隧道围压影响的模型试验与理论分析[J].岩土工程学报, 2022,44(10):1789-1798. (Wei Gang, Zhang Shuming, Yu Jianying, et al. Model Tests and Theoretical Analyses of Influences of Surface Surcharge on Confining Pressure of Shield Tunnels[J]. Chinese Journal of Geotechnical Engineering, 2022,44(10):1789-1798. (in Chinese))
[19] 张人志,张庆丰,丛英学,等.复合地层对盾构隧道衬砌变形影响规律研究[J].地下空间与工程学报,2022,18(增2):737-742,759.(Zhang Renzhi,Zhang Qingfeng,Cong Yingxue,et al.Study on the effect of multi-layers on lining deformation in shield tunnel[J].Chinese Journal of Underground Space and Engineering,2022,18(Supp.2):737-742,759.(in Chinese))
[20] 杨钊,罗会武.地铁盾构管片接头抗弯刚度模型试验与数值分析[J].地下空间与工程学报,2018,14(6):1542-1548.(Yang Zhao,Luo Huiwu.Model test on the bending stiffness of metro shield segment joint and its numerical analysis[J].Chinese Journal of Underground Space and Engineering,2018,14(6):1542-1548.(in Chinese))
[21] 崔涛. 盾构隧道局部破坏引发隧道连续破坏机理及控制研究[D]. 天津: 天津大学, 2017. (Cui Tao, Study on the Mechanism and Prevention of Progressive Failure of Shield Tunnel Induced by Local Failure[D]. Tianjin: Tianjin University, 2017. (in Chinese))
[22] Lee K M., Ge X W. The Equivalence of A Jointed Shield Driven Tunnel Lining to A Continuous Ring Structure[J]. Canadian Geotechnical Journal, 2001,38(3): 461-483.
[23] Ye F, Gou C F, Sun H D, et al. Model Test Study on Effective Ratio of Segment Transverse Bending Rigidity of Shield Tunnel[J]. Tunnelling and Underground Space Technology, 2014,41(1):193-205.
[24] Do N A, Dias D, Oreste P, et al. Three-dimensionalNumerical Simulation for Mechanized Tunnelling in Soft Ground: The Influence of the Joint Pattern[J]. Acta Geotechnica, 2014,9(4): 673-694.
[25] Thienert D I C. SegmentDesign under Consideration of the Material Used to Fill the Annular Gap[J]. Geomechanik Und Tunnelbau, 2011,4(6): 665-680.
[26] 曾东洋, 何川. 地铁盾构隧道管片接头抗弯刚度的数值计算[J]. 西南交通大学学报, 2004,39(6): 744-748. (Zeng Dongyang, He Chuan. Numerical Simulation of Segment Joint Bending Stiffness of Metro Shield Tunnel [J]. Journal of Southwest Jiaotong University, 2004,39(6): 744-748. (in Chinese))
