设计、施工、监测

隧道掘进楔形掏槽精确延时爆破技术与应用研究

  • 胡宇 ,
  • 汪艮忠 ,
  • 周珉 ,
  • 高文学 ,
  • 张小军
展开
  • 1.北京工业大学 建筑工程学院,北京 100124;
    2.浙江利化爆破工程股份有限公司,浙江 丽水 323300
胡宇(1996—),男,安徽枞阳人,博士,主要从事岩土工程、地下工程等领域的科研工作。E-mail:HUyu0420@emails.bjut.edu.cn
高文学(1962—),男,湖北仙桃人,博士,教授,主要从事岩土工程、地下工程等领域的研究工作。E-mail:wxgao@bjut.edu.cn

收稿日期: 2024-08-08

  网络出版日期: 2025-06-13

基金资助

爆破工程湖北省重点实验室开放基金(BL2021-23)

Study on Precise Delay Time Technology and Application of V-Cut Blasting in Tunnel Excavation

  • Hu Yu ,
  • Wang Genzhong ,
  • Zhou Min ,
  • Gao Wenxue ,
  • Zhang Xiaojun
Expand
  • 1. College of Architecture and Civil Engineering, Beijing University of Technology, Beijing 100124, P.R. China;
    2. Zhejiang Lihua Blasting Engineering Co., Ltd., Lishui, Zhejiang 323300, P.R. China

Received date: 2024-08-08

  Online published: 2025-06-13

摘要

为降低隧道楔形掏槽爆破振动强度,基于Mohr-Coulomb强度准则及最大拉应力理论与Anderson叠加原理,提出隧道楔形掏槽爆破精确延时技术。通过理论分析,揭示了楔形掏槽延时爆破机理,优化了掏槽孔起爆顺序;引入Gauss函数,对爆破振动波型进行拟合,得到了对应的函数表达式;结合Matlab软件对其进行不同延期时间的叠加计算,得到了降低爆破振动的精确延期时间。以国道109齐家庄隧道为背景工程,结果表明:楔形掏槽延时爆破,降低了单段起爆药量、改善了后爆孔爆破破岩条件并减弱了爆破振动传播能量;当延期时间为13 ms时,与常规掏槽爆破相比,振动强度降低约60%;理论分析与现场监测数据相对误差13.9%,验证了该技术的有效性。

本文引用格式

胡宇 , 汪艮忠 , 周珉 , 高文学 , 张小军 . 隧道掘进楔形掏槽精确延时爆破技术与应用研究[J]. 地下空间与工程学报, 2025 , 21(3) : 1050 -1056 . DOI: 10.20174/j.JUSE.2025.03.34

Abstract

To reduce the vibration intensity of wedge-shape excavation blasting in tunnel, the precisely controlled delay time technology of tunnel V-cut blasting was proposed based on the Mohr-Coulomb strength criterion, the maximum tensile stress, and Anderson superposition theory. Firstly, the mechanism of segmental blasting of V-cut is revealed through theoretical analysis. Secondly, the function of blasting vibration waves was obtained by fitting the Gauss function. Finally, the precise delay time of reducing blasting vibration was obtained by superimposing different delay times with Matlab. The results show that: The stepped V-cut blasting improves the free surface conditions of blasting, and weakens the vibration propagation energy by reducing the amount of blasting charge in a single stage. Based on the Qi Jiazhuang tunnel of National Highway 109, the vibration strength of V-cut blasting was reduced by about 60% when the delay time was 13 ms. The engineering practice showed that the relative error between the theory and the field monitoring data was 13.9%, which verified the validity of the technology.

参考文献

[1] 马伟斌. 铁路山岭隧道钻爆法关键技术发展及展望[J]. 铁道学报, 2022, 44(3): 64-85. (Ma Weibin, Development and prospect of key technology of drilling and blasting for railway mountain tunnels [J]. Journal of the China Railway Society, 2022, 44(3): 64-85. (in Chinese))
[2] 张继春, 曹孝君, 郑爽英, 等. 浅埋隧道掘进爆破的地表震动效应试验研究[J]. 岩石力学与工程学报, 2005(22): 4158-4163. (Zhang Jichun, Cao Xiaojun, Zheng Shuangying, et al. Experimental study on vibration effects of ground due to shallow tunnel blasting [J]. Chinese Journal of Rock Mechanics and Engineering, 2005(22): 4158-4163. (in Chinese))
[3] BERTA G. Blasting-induced vibration in tunneling[J]. Tunneling and Underground Space Technology, 1994(9): 175-187.
[4] 石洪超, 张继春. 并行小净距隧道楔形掏槽爆破振动效应研究[J]. 地下空间与工程学报, 2019, 15(2): 607-613, 621. (Shi Hongchao, Zhang Jichun. Blasting vibration effect of wedge cut blasting in parallel small-distance tunnel [J]. Chinese Journal of Underground Space and Engineering, 2019, 15(2): 607-613, 621. (in Chinese))
[5] 叶飞, 冯浩岚, 曹凯, 等. 近距离穿越古迹隧道爆破施工爆源参数优化[J]. 地下空间与工程学报, 2022, 18(4): 1292-1304, 1316. (Ye Fei, Feng Haolan, Cao Kai, et al. Optimization of blasting source parameters in blasting construction of close passing through historic site tunnel [J]. Chinese Journal of Underground Space and Engineering, 2022, 18(4): 1292-1304, 1316. (in Chinese))
[6] 高文学,侯俊杰,张三. 浅埋偏压隧道掘进爆破地表振动效应研究[J]. 工程爆破,2023, 29(6): 147-152(Gao Wenxue, Hou Junjie, Zhang San. Study on the surface vibration effects of shallow buried eccentric tunnel excavation blasting[J]. Engineering Blasting, 2023, 29(6): 147-152. (in Chinese))
[7] 杨年华, 张志毅. 隧道爆破振动控制技术研究[J]. 铁道工程学报, 2010, 27(1): 82-86. (Yang Nianhua, Zhang Zhiyi. Research on the control technology for tunnel blasting vibration[J]. Journal of Railway Engineering Society, 2010, 27(1): 82-86. (in Chinese))
[8] 陈义东, 王金国, 陈度军, 等. 地铁隧道电子雷管爆破降振技术及爆破参数优化[J]. 科学技术与工程, 2017, 17(27): 298-302. (Chen Yidong, Wang Jinguo, Chen Dujun, et al. Study of decreasing blasting vibration technology with digital detonator and parameters optimization in metro tunnel[J]. Science Technology and Engineering, 2017, 17(27): 298-302. (in Chinese))
[9] 邹新宽, 张继春, 潘强, 等. 楔形分段掏槽爆破减振效应研究[J]. 西南交通大学学报, 2018, 53(3): 450-458. (Zhou Xinkuan, Zhang Jichun, Pan Qiang, et al. Vibration reduction effect of stepped V-cut blasting[J]. Journal of Southwest Jiaotong University, 2018, 53(3): 450-458. (in Chinese))
[10] 李清, 于强, 张迪, 等. 地铁隧道精确控制爆破延期时间优选及应用[J]. 振动与冲击, 2018, 37(13): 135-140, 170. (Li Qing, Yu Qiang, Zhang Di, et al. Metro tunnel precisely controlled blasting's delay time optimization and its application[J]. Journal of Vibration and Shock, 2018, 37(13): 135-140, 170. (in Chinese))
[11] Huang D, Qiu X Y, Shi X Z, et al. Experimental and numerical investigation of blast-induced vibration for short-delay cut blasting in underground mining[J]. Shock and Vibration, 2019(2): 5843516.
[12] 傅洪贤, 沈周, 赵勇, 等. 隧道电子雷管爆破降振技术试验研究[J]. 岩石力学与工程学报, 2012, 31(3): 597-603. (Fu Hongxian, Shen Zhou, Zhao Yong, et al. Experimental study of decreasing vibration technology of tunnel with digital detonator [J]. Chinese Journal of Rock Mechanics and Engineering, 2012, 31(3): 597-603. (in Chinese))
[13] 龚敏, 吴昊骏, 孟祥栋, 等. 密集建筑物下隧道开挖微振控制爆破方法与振动分析[J]. 爆炸与冲击, 2015, 35(3): 350-358. (Gong Min, Wu Junhao, Meng Xiangdong, et al. A precisely-controlled blasting method and vibration analysis for tunnel excavation under dense buildings [J]. Explosion and Shock Waves, 2015, 35(3): 350-358. (in Chinese))
[14] 杨仁树, 车玉龙, 冯栋凯, 等. 切缝药包预裂爆破减振技术试验研究[J]. 振动与冲击, 2014, 33(12): 7-14. (Yang Renshu, Che Yulong, Feng Dongkai, et al. Tests for blasting vibration reduction technique with presplitting blasting of a slotted cartridge [J]. Journal of Vibration and Shock, 2014, 33(12): 7-14. (in Chinese))
[15] 刘京增. 复杂地质环境下大断面隧道控制爆破技术[J]. 公路, 2019, 64(3): 337-341. (Liu Jingzeng. Controlled blasting technology of large section tunnel under complex geological environment [J]. Highway, 2019, 64(3): 337-341. (in Chinese))
[16] 王海亮. 大直径中空孔直眼掏槽微振动爆破参数研究[J]. 隧道建设, 2015, 35(2): 174-179. (Wang Hailiang. Study on micro-vibration blasting parameters of large-diameter empty-hole parallel cut [J]. Tunnel Construction, 2015, 35(2): 174-179. (in Chinese))
[17] 吴昊骏, 龚敏. 基于雷管实际延时范围的逐孔爆破振动合成计算与应用[J]. 爆炸与冲击, 2019, 39(2): 151-161. (Wu Haojun, Gong Min. Calculation and application of hole by hole blasting vibration superposition based measured delay times of detonators [J]. Explosion and Shock Waves, 2019, 39(2): 151-161. (in Chinese))
[18] 肖维民, 李锐. 天然充填岩石节理抗剪强度模型研究进展[J]. 地下空间与工程学报, 2018, 14(增2): 725-736. (Xiao Weimin, Li Rue. Advances in shear strength models of natural infilled rock joints [J]. Chinese Journal of Underground Space and Engineering, 2018, 14(Supp. 2): 725-736. (in Chinese)).
[19] 康宏垚,孔艳婷,胡宇,等. 楔形掏槽分段延时爆破技术研究[J]. 中国矿业,2024, 33(增2): 330-335. (Kang Hongyao, Kong Yanting, Hu Yu, et al. Study on wedge cutting segmented delayed blasting technology [J]. China Mining Magazine, 2024. 33(Supp. 2): 330-335 (in Chinese))
[20] 王成, 冯锡勇. 隧道爆破施工对地表砖砌高烟囱影响的数值分析[J]. 地下空间与工程学报, 2015, 11(增2): 768-771. (Wang Chen, Feng Xiyong. Numerical analysis on the impact of the tunnel blasting construction on the surface high brick chimney [J]. Chinese Journal of Underground Space and Engineering, 2015, 11(Supp. 2): 768-771. (in Chinese))
[21] 马晨阳, 吴立, 孙苗. 自由面数量对水下钻孔爆破振动信号能量分布及衰减规律的影响[J]. 爆炸与冲击, 2022, 42(1): 145-156. (Ma Chenyang, Wu Li, Sun Miao. Influence of free surface numbers on the energy distribution and attenuation of vibration signals of underwater drilling blasting [J]. Explosion and Shock Waves, 2022, 42(1): 145-156. (in Chinese))
[22] 龚敏, 石发才, 吴晓东. 基于叠加和频谱分析的电子雷管延期时间研究[J]. 振动与冲击, 2019, 38(15): 134-141. (Gong Min, Shi Facai, Wu Xiaodong. Delay time of electronic detonators based on superposition and frequency spectral analysis [J]. Journal of Vibration and Shock, 2019, 38(15): 134-141. (in Chinese))
[23] 张学峰. 集合卡尔曼滤波数据同化方法在海温数值预报中的应用研究[D]. 杭州:浙江大学,2005. (Zhang Xuefeng. Collection of the Kalman filter data assimilation methods in the numerical prediction of the sea surface temperature [D]. Hangzhou: Zhejiang University, 2005. (in Chinese))
[24] 唐冲, 惠辉辉. 基于Matlab的高斯曲线拟合求解[J]. 计算机与数字工程, 2013, 41 (8): 1262-1263, 1297. (Tang Chong, Hui Hhuihui. Gaussian curve fitting solution based on Matlab [J]. Computer & Digital Engineering, 2013, 41 (8): 1262-1263, 1297. (in Chinese))
文章导航

/